If you select a property with a swimming pool or wish to install a swimming pool or spa at a DHA managed property, it is important you are aware of the responsibilities and necessary approvals. See the fact sheets below.
Swimming pool or spa fact sheet (existing pool or spa at property)
This DHA managed property has a pool or spa on the property. As a result, you as the occupant have additional responsibilities which are outlined in this fact sheet.
Definition of a pool
The current Australian Standard AS1926-2012 defines a swimming pool as any structure containing water to a depth greater than 300 mm and used primarily for swimming, wading, paddling or the like, including a bathing or wading pool, or spa pool.
What is pool compliance?
Any vessel that meets the above definition is subject to certain legislative requirements. These requirements can differ between each state/territory and local government.
The pool at your Service residence must be compliant with the applicable standards in your location. These standards will determine the fencing requirements for the pool, how often the pool must be inspected, and other factors designed to ensure the pool is safe for you and your family.
Refer to the following sections for more information on who is responsible for maintaining compliance of the pool at your Service residence.
Installation of swimming pools and spas
If you have not gained the necessary approvals, you are in breach of your occupancy agreement and will be asked to immediately reduce the volume of water to less than 30cm depth until such approvals are obtained.
Even if approval is obtained, you will be responsible for returning the property back to its original condition.
Applying to install a swimming pool or spa
1. Read the Installing a temporary swimming pool or spa fact sheet below to understand pool compliance and your responsibilities.
2. Obtain written approval from your local council.
3. Submit your request along with the council approval to DHA via an Online Services(Opens in a new tab/window) enquiry.
4. DHA will assess your request and email you the outcome.
Installing a temporary swimming pool or spa fact sheet
This fact sheet provides an overview of your responsibilities when installing, maintaining compliance and removing a swimming pool at your DHA managed property.
A temporary swimming pool or spa can only be installed at your DHA managed property with written approval from both DHA and the local council.
Definition of a pool
The current Australian Standard AS1926-2012 defines a swimming pool as any structure containing water to a depth greater than 300 mm and used primarily for swimming, wading, paddling or the like, including a bathing or wading pool, or spa pool.
What is pool compliance?
Any vessel that meets the above definition is subject to certain legislative requirements. These requirements can differ between each state/territory and local government.
The pool at your Service residence must be compliant with the applicable standards in your location. These standards will determine the fencing requirements for the pool, how often the pool must be inspected, and other factors designed to ensure the pool is safe for you and your family.
Refer to the following sections for more information on who is responsible for maintaining compliance of the pool at your Service residence.
Where can I find more information on pool compliance in my location?
The resources below provide information on the standards in each state/territory. For more specific details on the requirements in your area, contact your local council.